Closeouts Deals
Attention:
> The Products will be ship as shown in the photograph
> Please Note the availability with each item
> Please Contact Scott - Email or your local Luke Leather
Repersentative for Closeouts Details and Prices
Softy Collection
Quantity - 3 Chairs
Frame
The wooden frame on this collection is composed of beech wood and european spruce. These woods are selected at source and seasoned for minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame.
Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that runs front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 2524 Cappucino
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth if addressed within minutes of the spill, spot or stain. This color will offer the consumer outstanding versatility as it could go into any environment with any color scheme or design idea. Can you can imagine sipping your favorite cappuccino with cinnamon, milk and coffee? If so, if you mix it all together, you will have the color of the leather on the Softy collection. This color will for sure go with any décor or color scheme.
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper for comfort. The density of these cushion’s vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in by computer to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and benefits of the Softy Collection
The Softy Collection has a very soft and well tailored envelope arm. There is no need to get a pillow from the bedroom to watch TV. I will assure you this one is more comfortable. The solid wooden foot also is very stylish and there will not be any plastic feet here. You will also find a very clean stitch design on the back cushion. The Softy collection has excellent, styling, design and comfort. You will be very pleased with this purchase. You will not believe the soft comfort that you will experience as will sit or relax in the Softy.
Contact Scott - Email or your Local Luke Leather Representative for Prices
Hannah Collection
Quantity - 3 Chairs
available in 2525 Cherry (same color as weston)
Frame
The wooden frame on this collection is composed of beech wood and european spruce. These woods are selected at source and seasoned for minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame.
Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S” shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions only. This material holds 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that runs front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 2524 Cappucino
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane finish on the surface of the leather. This gives the consumer versatility in wear and use. The most common household stains can be easily cleaned with a damp cloth if addressed within minutes of the spill, spot or stain. This color will offer the consumer outstanding versatility as it could go into any environment with any color scheme or design idea. Can you can imagine sipping your favorite cappuccino with cinnamon, milk and coffee? If so, if you mix it all together, you will have the color of the leather on the Hannah collection. This color will for sure go with any décor or color scheme.
Cushions & Seating
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper for comfort. The density of these cushion’s vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown in by computer to vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time.
Sales Features and benefits of the Hannah Collection.
The Hannah Collection has a very soft and well tailored envelope arm. There is no need to get a pillow from the bedroom to watch TV. I will assure you this one is more comfortable. The solid wooden foot also is very stylish and there will not be any plastic feet here. You will also find a very clean stitch design on the back cushion. The Hannah collection has excellent, styling, design and comfort. You will be very pleased with this purchase.
Contact Scott - Email or your Local Luke Leather Representative for Prices
Dakota Collection
Quantity - 5 Sofas
Quantity - 8 Chairs
Quantity - 1 Ottomans
Frame
The wooden frame on this collection is composed of beech wood and european spruce. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
Suspension Unit
We incorporate in our suspension unit; heavy duty nine gauge sinuous spring steel. These “S: shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. We will continue to use heavy duty European elastic webbing to support the back cushions. This material will hold 720 pounds of pressure per square inch. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather: 2501 Hazlenut
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane on the surface of the leather. This gives the consumer versatility in wear and use; most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. You will notice some color variation and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered unusual. This leather is buttery soft and will work in any décor or color scheme at home. This leather is without a doubt our softest leather that we over in our collection.
Cushions and Seating
The seat cushions are composed of polyurethane foam cores with our NEW and improved silicone dacron topper for comfort. You will find the density of the seat cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown by computer into vertically and horizontally channeled bags. This ensures that the proper amount of silicone (highly resilient) Dacron is blown in the same every time.
Sales Features and Benefits of the Dakota Collection
This model is small scale by design and works perfectly for small home environments, apartments, lofts and condominiums. You will find the comfort of this model to be very soft due to our NEW and IMPROVED silicone Dacron. This Dacron is highly resilient and will keep its strength much longer than regular Dacron. We also dress the product in our most expensive, softest leather. You have the ability to offer you customer a small scale sofa with a leather on it that you would normally find at a much higher price..PERFECT!!
Contact Scott - Email or your Local Luke Leather Representative for Prices